iRacing Dirt Street Stock Setups

Here's a Street Stock setup for Eldora Speedway 2018 Season 2 mad by Ed Burrell.

Here's my first Dirt Street Stock setup for Lanier National Speedway 2018 Season 1 at 50% track usage. This setup is based on my setup for the previous version of the Street Stock which was really a completely different car altogether. This setup is what I drive. It's quite a bit tighter than other setups and it suits me better. With tire wear being disabled, I think the best way to loosen or tighten these setups is with the cross weight. I don't recommend changing the tire stagger with this type of chassis. 1.875 inches is right where it needs to be, plus or minus 1/8 inch. Instead, adjust with…

Here's my second Dirt Street Stock setup for Lanier National Speedway 2018 Season 1 at 50% track usage. This setup is based directly on the iRacing default setup. I never could get it to run as well as my other setups which use a completely different suspension set and are different from this in just about every way. It's not bad, but it's not something I would run.

Here's my third Dirt Street Stock setup for Lanier National Speedway 2018 Season 1 at 50% track usage. This setup is based on version 1 from earlier in the season. I made one significant change and squeezed another tenth of a second out of the car.

Here's a Dirt Street Stock setup for Lanier National Speedway 2018 Season 4. This setup was prepared by Randy Smith.

Here's a Street Stock setup for Eldora Speedway 2018 Season 2 made by Tyler Gray.

Here's a setup for the Dirt Street Stock at Limaland Speedway 2019 Season 1 by Logan Cumby.

Here's a Street Stock setup for Oxford Plains Speedway 2018 Season 1 made by David Clark9.

Here's a Street Stock setup for Oxford Plains Speedway 2018 Season 1 made by Mike Fortier.