iRacing setups for the Asphalt Street Stock Car at Bristol Motor Speedway are available on these pages. If there are more than 9 iRacing setups available for this car/track combination, look for the navigation links near the bottom of the page.
How to Open the Setups
- Save these setup files to C:\Documents\iRacing\setups\streetstock\.
- Do not attempt to open the setup file in Windows.
- Load the setup in the iRacing simulation under Garage – My Setups.
Still having problems? Join OSR Voice/Text Chat.
Bristol Motor Speedway 162 iRacing Asphalt Street Stock Setup for 105° Track Temperature by Jeremy Adams
Here's a setup made by Jeremy Adams for Bristol Motor Speedway 2016 Season 2 (afternoon racing).
Bristol Motor Speedway 163 iRacing Asphalt Street Stock Setup for 105° Track Temperature by Jeremy Adams
Here is an iRacing Street Stock setup for Bristol Motor Speedway 2016 Season 3 (day racing), prepared by Jeremy Adams.
Bristol Motor Speedway 164 iRacing Asphalt Street Stock Setup for 78° Track Temperature by Jeremy Adams
Here is a setup for Bristol Motor Speedway 2016 Season 4, built for night racing by Jeremy Adams.
Here's a great Street Stock setup for Bristol Motor Speedway 2017 Season 1 (night). The setup has enough fuel to run about 80 laps. Don't go too hard on the tires and it will last and last. I run in the .4xx range for a couple of laps, then it runs .6xx's for me for somewhere around 10-15 laps. After it starts into the .7xx's I start moving up the track just a little bit. As the tires fall off more, I keep moving up a little more and trying slightly different lines to find what works best for a few laps. I keep on doing that until I can't…
Here's another Street Stock setup I made for Bristol Motor Speedway 2017 Season 1. This setup is a little more basic and a little more snug than the other one for this season. It's not quite as fast and the lap times fall off faster, but it's a good setup if you like something tighter or if you're looking for a good place to start building a new setup.